250 Gallon Skid Unit

Tank:

• 250 gallon polypropylene construction
• Base dimensions: 48″ Wide x 93″ Long (including platform)
• 3” suction port, 1.5” fill port, 1” drain plug
• Sight glass for level monitoring
• 8” x 12” fill tower with screen
• 3” overflow
• 48” booster reel blocks
• 3/4” thick floor, 1/2” thick walls, 3/8” baffles

Pump:

• Waterous 2515 pump with Honda 20.8hp engine
• Flow rates from 75 GPM @ 135 PSI to 150 GPM @ 90 PSI
• Control panel with start, stop, throttle, choke, and pressure gauge
• 6 gallon fuel tank
• 20 ft. power wire with 5 ft. ground for direct vehicle wiring

Plumbing:

• Cast aluminum expandable open-faced discharge manifold
• Nickel-plated brass 1/4 turn radius ball valves
• 2 1/2″ suction full port ball valve
• 2 1/2″ tank-to-pump full port ball valve
• 1″ booster reel line
• 1″ recirculate line
• 1 1/2″ discharge with cap and chain
• Guzzler hand primer

Hose Reel:

• Hannay steel booster reel
• Electric rewind with buttons on each side of tank
• 125 ft. capacity for 1-inch hose
• Roller assembly

Additional:

• Hose not included with the unit